Author

Aaron Bailey

Aaron Bailey has an in depth knowledge of ag chem, grain and livestock markets with over 14 years experience across feed manufacturing through to reselling. He was brought up on a family dairy farm in New Zealand and has been in Australia for 11 years. This background in NZ farming brings a practical application to the Victorian and Tasmanian role as Account Executive at Farmers Business Network.


May 12, 2022

by Aaron Bailey

Post-emergence herbicides are products used to control weeds and other non-desirable vegetation that have grown above ground. There are two types of herbicides that have different effects on the weeds and crop alike: Selective Selective post emergence herbicides are engineered to target the specific weeds they are labeled for. This is helpful in case you over-spray and get the herbicide on plants you do not want to knockdown. FBN®’s Amine 625 is an excellent selective herbicide choice right now. Non-selective Non-selective post-emergence herbicides will broadly target any plant material it comes into contact with, including knockdown effects on plants that do not carry a tolerance to the herbicide itself. These herbicides, when used at the labeled rates, can control weeds in as little as one application when applications are timed appropriately. MCPA 570 is an effective non-selective post-emergence herbicide you may wish to consider right now. 4 Tips for Planning Post-Emergence Weed Control To help you make an informed decision on your post-emergence weed control, we're outlined a few key tips below that may aid your decision making: 1. Choose Your Herbicide Wisely To evaluate the best post-emergence herbicide options, it is useful to know the resistance status of weeds on an individual property. Commercial resistance testing can confirm the effectiveness (or lack of) of herbicides and establish a baseline of herbicide sensitivity to take the ‘guesswork’ out of decision making. This can be carried out with seed testing at the start of the season or after harvest. 2. Apply at the Right time Contact post-emergence herbicides should be applied when weeds are actively growing but have not exceeded the height indicated on the label. Contact herbicides are absorbed through the leaves of the plant, so application should be made to a dry leaf with no wet weather forecast for at least two hours. Refer to labels for specific recommendations on rainfastness. 3. Avoid Tank Mixing Problems Often post-emergent applications contain multiple active ingredients. Follow label instructions to ensure your mix is compatible; if you are unsure, consult a local agronomist or conduct a jar test. Mixing products in the proper order, adding product to the solution slowly, using the right volume of water, and always ensuring agitation occurs before and during spray applications will reduce your likelihood of tank mixing problems. 4. Add a Surfactant Some liquid post-emergence herbicides will require the use of a surfactant. Surfactants are chemicals that, when mixed with your herbicide, will help the herbicide stick better to the plant, therefore increasing the rate of absorption. FBN’s Trio Wetta 1000 or Trio Chargeup Spray Oil are both available as mixing partners for your in crop herbicide applications (check label requirements). Protect Your Crop Investments FBN offers a range of weed control options for Australian farmers. Visit FBN Direct to see our available herbicides , adjuvants , and other crop protection solutions . Source: https://grdc.com.au https://www.agric.wa.gov.au Copyright © 2021 - 2022 Farmers Business Network Australia Pty Ltd. All rights Reserved. The sprout logo, "FBN", "Farmers First", "Farmers Business Network", and "FBN Direct" are registered trademarks or trademarks of Farmer's Business Network, Inc. ALWAYS READ AND FOLLOW LABEL DIRECTIONS. It is a violation of federal and state/territory law to use any pesticide other than in accordance with its label. The distribution, sale and use of an unregistered chemical product is a violation of federal and/or state/territory law and is strictly prohibited. We do not guarantee the accuracy of any information provided on this page or which is provided by us in any form. It is your responsibility to confirm prior to purchase and use that a product is labeled for your specific purposes, including, but not limited to, your target crop or pest and its compatibility with other products in a tank mix and that the usage of a product is otherwise consistent with federal, state, territory and local laws.  We reserve the right to restrict sales on a geographic basis in our sole discretion. You must be authorised to use restricted chemical products under applicable state or territory law.  Please consult your applicable state or territory authority for complete rules and regulations on the use of restricted chemical products as some products require specific record-keeping requirements. FBN Direct products and services and other products distributed by FBN Direct are offered by Farmers Business Network Australia Pty. Ltd. and are available only where Farmers Business Network Australia Pty Ltd. is licensed and where those products are registered for sale or use, if applicable. Nothing contained on this page, including the prices listed should be construed as an offer for sale, or a sale of products. All products and prices are subject to change at any time and without notice.  Terms and conditions apply. Any product recommendations and the material provided is for informational purposes only. It is not intended to be a substitute for consulting the product label or for specific agronomic, business,or professional advice. Where specific advice is necessary or appropriate, consult with a qualified advisor. Neither Farmer's Business Network Australia Pty Ltd nor any of its affiliates makes any representations or warranties, express or implied, as to the accuracy or completeness of the statements or any information contained in the material and any liability therefore is expressly disclaimed.


Jan. 11, 2022

by Aaron Bailey

Summer & pre-plant spray out is an important part of the grain growing cycle. By now, most growers have harvested the majority of their crops and are looking to take the next steps into summer spraying and pre-planting spray programs to help utilise the upcoming planting of their next crop. There are many factors to consider within this period, those being chemical selection spray timing, quantity of knock down passes and soil fertility to name a few. Managing this time of the cycle is very important in making sure crucial steps are taken to help produce high yields for your next crop. Controlling weeds is a key component in making this process more profitable in the long run. There are a few key points to consider when working through this process. Pre-planting tips Glyphosate is a contact-only herbicide and has no soil or residual activity. In other words, if it doesn’t touch the green tissue of a living plant it is non-effective. This allows you to spray very close to your planting time to help your crop get a jump start on any weeds. The ideal timing for spraying can take up to 2 weeks before planting to achieve really good knockdown results, so the time to act is now.  4 tips for good pre–planting herbicide applications Always read the Label - The information on the herbicide label contains all of the necessary information and identifies what weeds it kills and what the recommended rate is. Spray Early - Spray when grasses or broadleaf weeds are young and thriving. If the field is tall and overgrown, the results will often be less than desirable. If weeds are already tall and mature, mow first and return a few days later to spray the new re-growth even if it is minimal. Don’t Skimp on Water - Many times the correct amount of herbicide is used but not enough water is added to thoroughly spray mix (where necessary, get your water tested). Know Your Coverage Area - Knowing the size of paddocks you are going to be spraying will help you apply the appropriate amount of solution. To practice and calibrate your sprayer, find a paddock and measure it with a GPS to determine the size. Fill your spray tank with just water and take note of the speed you travel and the amount of water you apply over the known area. This will eliminate guesswork and yield better spray results. Controlling summer weeds Effective weed control can reduce weed numbers in subsequent years and run down the seedbank. Uncontrolled weeds contribute massively to the soil seedbank, creating increased costs of control and future weed burdens. This may limit crop choice and reduce flexibility within your program. Summer weed control can be expensive but is necessary to prevent problems with excessive growth and/or moisture and nitrogen loss from the soil.  When using herbicides Water rates should be kept high (at least 60 litres per hectare). Add a surfactant and/or spraying oil to all post-emergent treatments unless otherwise directed on the label. Do not spray stressed plants. Spray grazing can be effective at high stocking rates. When it's time to spray out Consider these factors before going ahead: Always check for susceptible crops in the area, for example broadleaf crops such as grape vines, cotton, vegetables and pulses, if you are using a broadleaf herbicide. Check sensitive areas such as houses, schools, waterways and riverbanks.  Notify neighbours of your spraying intentions. Planning your post-harvest spray program is key to allowing the best opportunity to produce high yielding crops post planting. Learn more Please visit fbn.com/en-au/direct to find out more about products available to help your pre-plant spray out. Source: https://grdc.com.au Copyright © 2022 Farmers Business Network Australia Pty Ltd. All rights reserved. "FBN" and "FBN Direct" are registered trademarks or trademarks of Farmer's Business Network, Inc. Products and services are offered by Farmers Business Network Australia Pty Ltd. and are available only where licensed.