where to set drill

Question

Have a case IH 5400 drill15” spacing where do I set this drill to drill waterway mix?

Answer

google drill calibration you may some help there

Answer

I asked #Norm, here's his answer:
 
 To drill a waterway mix, you will need to set your drill to the recommended seeding rate for the specific mix you are planting. The recommended seeding rate can vary depending on the mix and the area you are planting in.
 
 Once you have determined the recommended seeding rate, you can use the following formula to calculate the appropriate drill setting:
 
 Drill setting = (desired seeding rate x 100) / (row spacing x germination rate)
 
 For example, if the recommended seeding rate for your waterway mix is 20 pounds per acre, and your drill has a row spacing of 15 inches and a germination rate of 90%, the drill setting would be:
 
 Drill setting = (20 x 100) / (15 x 0.9) = 148.15
 
 So you would set your drill to 148.15 to achieve the desired seeding rate for your waterway mix.
 
 @u_a1034b1c1e454105 @u_2f828442aa75d66d

Call (844) 200-FARM

Get Your Instant Decision Today on Equipment Loans

where to set drill