What is the best pull type or 3pt tile plow available?

Question

Answer

Thank you for the input. Was trying to decide between Gold Digger Stealth, Bron and a Crary.

Answer

we like our johnson plow  i would get a 4 6 8 in boot we have had 900 hp on on deep 8 in pulls and never broke anything  would deffinitly spend the money for rtk control used to be lazer control alot easier and faster

Answer

Gold digger stealth plow is a pretty well built machine. But as far as actual best in class I wouldn’t be the expert. I do like the angle of the shank on the stealth. Makes a world of difference pulling versus some of the other brands such as O’Connell have a straight shank. ******* also makes a good plow

Answer

We have run a Wayne’s / Crary Tile pro for 20+ years. Great plow and support . Is more difficult to hook up as it attaches to the frame of the tractor rather than the drawbar. In my opinion that makes for a connection that is Similar to a commercial plow.  All of the farm market plows  have limitations that prevent them from doing everything  commercial plows do with confidence. Don’t expect a machine that you spend less than 10% of the price of a commercial plow to do everything. That being said,  a smartly  run farmer plow operated in decent conditions can put in a lot of tile and save a bundle over hiring a commercial contractor.

Answer

Make sure you get a plow with at least a 6’ shank. In order to put tile in at an average depth, you will need to have spots in the fields where it is deeper than optimum. Our 6 foot plow runs out of room for lifting soil any time we get in the 5 foot depth area. That makes the plow almost impossible to pull without a second pull tractor. Sometimes wish we had a 7 foot plow.

USA

Call (844) 200-FARM

What is the best pull type or 3pt tile plow available?

Welcome! You only have 2 free posts remaining.